Cable Certifier – IDEAL Networks LanTEK III Network Cable Certifier

Cable Testing DataComms

IDEAL LanTEK III Network Cable Certifier for Copper and Fibre Cabling

 

The LanTEK III is an easy to use network cable certifier that meets existing TIA and ISO/IEC performance requirements for testing up to Cat 7A/1000MHz.
FiberTEK III adapters are used with LanTEK III Cable Certifier for fast and simple certification of high bandwidth single-mode and multimode fibre optic cabling including support for encircled flux testing.

 

Lantek III Network Cable Certifier

 

Lantek III

Test data when you want it, where you want it

Using the free IDEAL AnyWARE app, field technicians can share test data with colleagues or customers without leaving the jobsite, resulting in greater collaboration, more on-time job completions and reduced costs.

New troubleshooting features that save time and money

Should a cable prove to be faulty, troubleshooting is easy with the introduction of Time Domain Return Loss (TDRL) and Time Domain Near End Cross Talk (TDNEXT) measurements.
To pinpoint fibre cabling faults every FiberTEK III adapter includes a built-in visible light source to help you visually pinpoint faults and locate fibre ports. These additional features help locate hidden connections, splices and cable faults and can save many hours previously spent troubleshooting problems on the job.
New permanent link (PL) adapter saves money

New PL adapters reduce down time and lower maintenance costs with field replaceable RJ45 contacts that eliminate the need to replace the complete adapters. New PL adapters feature centred connectors to ensure compatibility with all brands of Cat6A/Class EA cabling solutions. The PL adapters use high performance, ultraflexible cable that allows them to be used in confined spaces without damaging the PL adapter or the outlet being tested.

Modular solution to reduce capital costs

For many cable installers there is pressure to reduce capital equipment costs. The LanTEK III Network Cable Certifier and FiberTEK III Optical Modules uniquely offer a pick and mix solution of components, therefore you only pay for what you need. This includes a wide range of test modules, accessories and CAREPLANs to satisfy your specific requirements.

 

 

Permanent LinkPermanent Link Testing Modules

To test and certify UTP/STP cabling from the patch panel to the work area outlet. The RJ45 contacts on the tip of the Permanent Link Modules are field replaceable to reduce the cost of ownership.

The PL adapters use high performance, ultra-flexible cable that allows them to be used in confined spaces without damaging the PL adapter or the outlet being tested.

New PL adapters feature centred connectors to ensure compatibility with all brands of Cat6A/ISO Class EA cabling solutions.

 

Permanent Link

Channel Adapter

 

Channel Testing Modules

Select from a wide wide range of Channel Testing Modules for various applications including: RJ45, GG45, TERA and EC7.

 

Speciality testing modules are available, including COAX, Alien Cross Talk and Industrial Ethernet

 

Fibre Optic ModulesFibre Optic Testing Modules
FiberTEK III modules offer fast and simple Tier 1 certification of high bandwidth single-mode and multimode fibre optic cabling including support for encircled flux testing.

 

 

 

FibreTEK III

 

Fibre certification wizard to simplify setup and testing

 

Setup Wizard

Setup Wizard
Select field calibration (1-Jumper|3-Jumper) and measurement modes (Loopback|Normal), (Uni-Directional|Bi-Directional).

 

 

 

Auto-test

 

Auto-test
Perform auto-tests using the intuitive graphical interface to reduce mistakes and ensure accurate certification results.

 

 

Review

Review Results
Tier 1 certification results display:

• ISO/TIA/IEEE test standard
• Pass/Fail result
• dB loss of each fibre at each wavelength
• dB loss in each direction (when testing bi-directionally)
• Fibre link length
• dB margin / headroom

 

New troubleshooting features that save time and money
Should a cable prove to be faulty, troubleshooting is easy with the introduction of Time Domain Return Loss (TDRL) and Time Domain Near End Cross Talk (TDNEXT) measurements. These additional features help locate hidden connections, splices and cable faults and can save many hours previously spent troubleshooting problems on the job.

 

TDX

 

Efficient Data Management Software
IDEAL Data CENTER (IDC) is the free test result management software for the LanTEK III and FiberTEK III series of cable certifiers. IDC allows data cable installation professionals to easily download, manage, edit and print PDF reports. IDC offers a simple user interface with time saving features including:

  • Microsoft ribbon toolbars for ease of use
  • Only 4 button clicks to import data from the tester
  • >10,000 results managed in a single job
  • Professional reporting for your clients
  • Ability to group and filter test results into categories including:

– Test limits
– Devices
– Or any other data within the database

Software

 

Professional Reporting

Automatically generate test reports in PDF or CSV format. The summary page of each report can be customised to include logo, company and operator details.
Choose between 3 different reports than can show either passed, failed or all test results in each report:

  • Summary
  • Brief
  • Full

Reports

 

IDEAL Anyware